Below a summary table on the current load of the different
CAMAC Crates in use with the AMANDA-DAQ before implementation of the
new DAQ, as measured January 8th, 1998.
Changes in loads will be minor due to the changes in Feb. 1998,
so this gives the rough picture for the new DAQ98 as well.
Note, there are is the new Wiener Crate added since Feb. 1998.
Measured Current in Ampere.
Rack.Crate |
Crate-Type |
Modules |
+6 V I in A |
-6 V I in A |
+12 V I in A |
-12 V I in A |
+24 V I in A |
-24 V I in A |
5.1 3.1 3.2 3.3 3.4 |
LCR-8025 LCR-8025 LCR-8025 LC-1434A KinSys-1525
|
7x4413, 7x3412 6x3377, 9x7164 5x3377, 10x7164 1x4413, 5x3412 7x4413, 7x3412 |
22 40 41 9 17 |
50 32 33 15 43 |
.03 .04 .04 0. 0. |
.02 .02 .01 0. 0. |
0.7 5.0 5.3 0.17 0.4 |
1.0 1.9 1.5 0.22 0.5 |
Current load of the different CAMAC Crates in use with the AMANDA-DAQ before as of November, 2000.
Measured Current in Ampere.
Rack.Crate |
Crate-Type |
Modules |
+6 V I in A |
-6 V I in A |
+12 V I in A |
-12 V I in A |
+24 V I in A |
-24 V I in A |
3.1 3.2 3.3 5.1 6.2 6.3 Snmp.1 Snmp.2 |
LCR-8025 LCR-8025 DSP KinSys Wiener Wiener Maxima885 LC-1434A |
DAQ#1/TDC/ADC/.. DAQ#2/TDC/ADC/.. DISC-4413/3412 DAQ#3/12*ADC Dead (was DAQ#3) DAQ#4/11*ADC SNMP-SN SNMP-GRB/off |
33. 35.9 3.8 32. - 28.3 16 8.1 |
28.2 30.2 8.4 22. - 19.6 3. 1.9 |
.01 .02 .0 .0 - - .0 .0 |
.03 .02 .0 .0 - - .0 .0 |
5.1 5.3 .11 6.2 - 5.4 .02 .0 |
5.0 1.5 0.12 .0 - .0 .01 .0 |